Audacity not recording4/15/2024 You can then play the recorded audio back by clicking the 'Play' button. Click the 'Stop' button to stop the recording. The project will automatically start recording. Recording Device: Analogue 1 + 2 (Focusrite USB Audio)īe aware that i t is not possible to record only Input 2 as Audacity is a WDM application so you can either choose to record either Input 1 or Inputs 1 & 2.Ĥ) Click Tracks > Add New > then either choose a Mono Track (Input 1 on your Focusrite device) or Stereo Track (Input 1+2 on your Focusrite device)ĥ) Now press the record button in Audacity.Playback Device: Speakers (Focusrite USB Audio).Only Dell support can either correct it or have it repaired.In this example, we are using the Scarlett 2i2 3rd Gen interface and Audacity Version 3.2.1.ġ) First ensure you have downloaded and installed the driver for your interface ( ), then connect your interface.Ģ) Open Audacity and select Audio Setup and choose Audio Settings…ģ) In the Audio Settings tab, select the following: If it does not fix it, with a new PC best to call Dell support. This "refresh" fixes a lot of problems and if lucky will take care of yours. Restart the PC and when Windows starts it will detect and reinstall the Realtek. Go to the Device Manager, In the Sound Video and Game Controllers section RIGHT click on the Realtek entry and then LEFT click "Uninstall". As its detecting the mic as line in, try recycling the Sound and see if that helps. There is only a MIC (and headset) jacks on the front panel. Line in is for a stereo signal input from a device such as a stereo system, audio out from an MP3 player, etc. Choose your preferred recording device from the Recording Device dropdown menu in the Audio Settings preferences. The PC (Realtek chip) is detecting the mic in as"line in" which does not have the needed 5VDC that the computer mic needs to operate. Now that you know that you can hear what Audacity is playing you can continue setting up for recording. The "Line in" seems to be the key to the computer mic not working and the PA mic working. I really appreciate your tenacity in this matter because I have no idea what the **bleep** is going on and I'm really not a computer person :)įorget Audacity for now. I get a recording using the computer mic, and it records in both channels but it sounds like an alien ship landing and some sort of low frequency feedback output reads speakers/headphones, input reads line in (real tek audio. Under system sounds there is Unknown input output. There is another heading for app volume under it says system sounds input output and they are on default. If I go back to sound settings and right click on that there is another catagory at the bottom as well that says app volume and device properties, another box opens and says input line in. On the pc I right clicked open sound settings> and input reads line in underneath it says device properties and opens up another box that says line in properties and has an icon of a Mic and says line in. On the audacity program, next to the mic icon, it has stereo mix (real tek audio) Also check the volume level for the mic, as it may be at zero."" Are you talking about on the PC or the audacity program? ""If you can't hear your voice, verify the mic is enabled in the Sound/Recording panel. Using the PA mic I can record, in one track, and also hear my voice through the headphones as well. I cannot hear my voice on my headphones as well on my unit, but can on hers. I have checked all the gain settings, and they are all up. The computer mic does not work at all on this unit but does on my wife's. There is a third type which is a USB connected and with USB's they output is digital, not analog. mic is generally around -40db, where the "computer" mic is around -10db and the reason for the low or no signal level from a dynamic P.A. type mic can be a dynamic mic which does not require any voltage or a condenser type that requires something near +48VDC (many will work at lower voltages but not the computer 5VDC). The PC supplies 5VDC on the "Ring" connection of the standard 1/8" (3.5mm) stereo "TRS" plug (Tip is the signal, Ring is 5VDC and Sleeve is ground). A Computer Mic is a condenser mic and requires 5VDC to operate. Also check the volume level for the mic, as it may be at zero.ĭifference between mics. If you can't hear your voice, verify the mic is enabled in the Sound/Recording panel. If you can't hear your voice then that is the problem and not a "problem" with Audacity. With Stereo Mix whatever input is heard on the speakers is available to any program that has Stereo Mix as its source. Did/does the "computer" mic work? It has the higher signal level needed by PC sound cards.Ĭan you hear your voice on the PC speakers? If you do then Audacity should get the signal via Stereo Mix.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |